Saltar al contenido principal

Changes to Step #3

Editado por Brett Balcer

Aprobación pendiente

Borrada
Añadida
Sin cambios

Step Lines

[* black] Flip the board over and locateblue] Locate the ribbon cable for the main display on the bottom of the board
[* icon_noteblack] Slowly lift the ribbon connecter from its housing using a plastic opening tool or your fingers
[* black] Flip the board over and locateblue] Locate the ribbon cable for the main display on the bottom of the board
[* icon_noteblack] Slowly lift the ribbon connecter from its housing using a plastic opening tool or your fingers

Imagen 1

Versión antigua

Nueva versión

Imagen 2

Borrada