Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #7

Editado por Matthew Newsom

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Each propeller is made up of the propeller bladeblade, gear, motor and gear driven by a motormotor controller board.
[* black] Each motor has its ownAfter removing the cable connector and the three Phillips screws securing the controller board which gets fed instructions byto the motherboard depending oncentral cross, the data collected fromscrews under the altimeter, gyroscope, and vertical camerapropeller gear still hold the propeller assembler together.
[* black] Each propeller is made up of the propeller bladeblade, gear, motor and gear driven by a motormotor controller board.
[* black] Each motor has its ownAfter removing the cable connector and the three Phillips screws securing the controller board which gets fed instructions byto the motherboard depending oncentral cross, the data collected fromscrews under the altimeter, gyroscope, and vertical camerapropeller gear still hold the propeller assembler together.