Cambios al paso #3
Editado por William —
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Disconnect the ribbon that attaches to the logic board by rotating the connector upwards. |
|---|---|
| + | [* black] Disconnect the ribbon that attaches to the left side of the logic board by rotating the connector upwards. |
| [* black] Then, pull the ribbon out. | |
| - | [* black] Now disconnect the white connector on the top right side of the camera. |
| + | [* black] Now disconnect the white connector on the top right side of the camera by pulling the wire out of the connector with you fingers. |