Cambios al paso #5
Editado por Samantha Taylor —
Edicion aprobada por Samantha Taylor
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* yellow] Disconnect the ribbon at the bottom of the main board by flipping up the brown ZIF connector and sliding the ribbon out. | |
| + | [* black] NOTE: Tweezers are recommended to perform this step. |
| [* blue] If the flash is not removed, remove the right most square connector at the bottom of the camera by flipping up the connector with two fingers until it detaches. | |
| [* violet] Locate the white rubber cover on the microphone. | |
| - | [* icon_caution] Be sure not to lose the white rubber cover for the microphone. |
| + | [* icon_caution] Be sure not to lose the white silver rubber cover for the microphone. |