Saltar al contenido principal

Cambios al paso #2

Editado por Lindsey Cullums

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Turn the motherboard so that the screen faces upward.
[* black] Holding the sides of the screen, pull the screen up and off of the motherboard.
[* icon_note] Note: When you remove the screen from the motherboard, resistance is normal.
-[* black] Replace old screen containing the speaker with a new screen/speaker. Follow this guide in reverse to reassemble.
+[* black] Replace old screen containing the speaker with a new screen/speaker.
+[* black] Before reassembling, identify the two black plastic tabs on the screen/speaker, as seen in the 2 photos. When replacing the screen/speaker, make sure that these tabs are properly inserted just above the keypad.
+[* black] To finish reassembly, follow the rest of the steps in reverse.