Skip to main content

Changes to Step #2

Editado por Delilah

Edicion aprobada por Delilah

Borrada
Añadida
Sin cambios

Step Lines

[* black] Pull the metal bar out through the rightright side of the eject lever.
[* icon_caution] Make sure to keep track of the spring located on the left side of the lever as it may shoot off when removing the metal bar.
[* icon_note] When reassemblingreassembling, the procedure becomes more difficult due to the spring (marked red). We recommend that one person hold the spring in place (picture 3) while the otheranother person slides the metal bar followed byback into the left housing, and slide the eject buttonlever onto the metal bar.
[* black] Pull the metal bar out through the rightright side of the eject lever.
[* icon_caution] Make sure to keep track of the spring located on the left side of the lever as it may shoot off when removing the metal bar.
[* icon_note] When reassemblingreassembling, the procedure becomes more difficult due to the spring (marked red). We recommend that one person hold the spring in place (picture 3) while the otheranother person slides the metal bar followed byback into the left housing, and slide the eject buttonlever onto the metal bar.