Saltar al contenido principal

Cambios al paso #3

Editado por Blair Frandeen

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Pry the phone apart with a 2.5 flathead screwdriver. Pry from one side of the phone by inserting the head into a slot and pushing the side plate away from the body.
-[* black] After one side has been pried free, You should be able to separate the entire back plate.
+[* orange] Insert spudger into marked holes, one at a time, and pry outward to release tabs.
+[* black] After both tabs have been released, you should be able to separate and remove the rear casing.

Imagen 1

Versión Antigua

Nueva Versión