Saltar al contenido principal

Cambios a este Paso

Editado por Daniel Rostom

Edicion aprobada por Daniel Rostom

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Using you fingers, remove the green tape holding the leftmost ribbon cable down, set this tape aside for latter.
+[* black] Using you fingers, remove the green tape holding the leftmost ribbon cable down.
[* black] Using the metal spudger, carefully lift the black tab that holds the leftmost ribbon cable in place.
-[* black] Using your fingers, slide the cable straight out of the connector, repeat this step for the other two ribbon cables.
-[* black] Repeat this process for the other two ribbon cables covering the battery.
+[* black] Using your fingers, slide the cable straight out of the connector.
+[* red] Repeat this process for the other two ribbon cables covering the battery.

Imagen 1

Versión Antigua

Nueva Versión