Repara tus cosas Comunidad Tienda

Cambios al paso #2

Editado por Johneli Jimenez-Diaz —

Edicion aprobada por Johneli Jimenez-Diaz

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Place the camera down so that the lens is facing up.
+[* black] Place the camera down with the lens facing up.
[* red] Next, use the Phillips #00 Precision Screwdriver to unscrew the inner most 4 mm phillips head screw. This will remove the door from the camera.
-[* icon_reminder] Always place screws on the the Magnetic Mat and write the size and location of where they were removed from with a dry erase marker.
+[* icon_reminder] Be sure to place all screws on the Magnetic Mat. Using a dry erase marker, write the size and location of where the screws were removed from.