Cambios al paso #7
Editado por Kristen Gismondi —
Edicion aprobada por Kristen Gismondi
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* red] Remove the 3 mm Phillips head screw that is between the circuit boards. | |
| - | [* icon_reminder] |
| + | [* icon_reminder] The other screw was the 4 mm screw that is between the circuit boards was taken off during step five of this guide. |
| [* orange] Remove the next three 3.5 mm Phillips head screws that are on the button circuit board. |