Cambios al paso #10
Líneas de Paso
| [* black] Use the plastic opening tool to begin separating the user button circuit board from the shutter button and settings dial housing unit. | |
| [* red] Carefully disconnect the ribbon cable that is attached to the user buttons circuit board away from the ZIF connector that is attached to the motherboard with your thumb and index finger. Get as close to the ZIF connector as possible without touching the motherboard. | |
| - | [* icon_caution] Be careful |
| + | [* icon_caution] Be careful not the rip the ribbon cable out of the ZIF connector when removing. |
| [* black] Remove the user button circuit board. |