Cambios al paso #7
Editado por Jacob Lucaci —
Edicion aprobada por Jacob Lucaci
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Remove the 3 mm phillips head screw that is between the circuit boards. |
|---|---|
| - | [* icon_reminder] The other screw was the 4 mm screw that is between the circuit boards was taken off during step five of this guide. |
| - | [* orange] Remove the next three 3.5 mm phillips head screws that are on the button circuit board. |
| - | [* icon_note] You do not have to unsolder the LCD screen if you are only replacing the shutter button. |
| + | [* red] Remove the 3mm Phillips head screw between the circuit boards. |
| + | [* orange] Remove the three 3.5mm Phillips head screws on the circuit board. |