Repara tus cosas Comunidad Tienda

Cambios al paso #4

Editado por Jess J Cunning —

Edicion aprobada por Jess J Cunning

Antes
Después
Sin cambios

Líneas de Paso

[* black] Gently grasp the motherboard by the heat sink (the black finned piece). Lift the motherboard at an angle such that the ports along the back side come up first.
-[* black] Continue lifting the motherboard and then slowly tilt the piece off to the right to break the mylar tape over the front USB ports.
-[* icon_caution] Be careful when handling the motherboard to prevent electro-static discharge (ESD) damage that can harm the motherboard. If the motherboard is being remove as part of a prerequisite place the motherboard into a bag designed to prevent a build up of a static charge (usually referred to has a static bag).
+[* black] Continue lifting the motherboard, then slowly tilt the piece off to the right to break the Mylar tape over the front USB ports.
+[* icon_caution] Be careful when handling the motherboard to prevent electro-static discharge (ESD) damage that can harm the motherboard. If the motherboard is being removed as part of a prerequisite, place the motherboard into a bag designed to prevent a build up of a static charge (usually referred to has a static bag).