Cambios al paso #2
Editado por Frank Pecka —
Edicion aprobada por Frank Pecka
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] |
|---|---|
| + | [* black] Grab the heat sink and motherboard. |
| [* black] Gently pull the heat sink away from the board. | |
| + | [* icon_reminder] When replacing the heat sink, be sure to apply a new layer of thermal compound to the CPU to avoid overheat damage. |
| + | [* icon_note] To reattach the heat sink: line the four clips up with the appropriate holes in the motherboard then simply push down on them to push them through to board. There should be a small click when each one is engaged. |