Saltar al contenido principal

Cambios a Paso #2

Editado por Kenny Richmond

Edicion aprobada por Kenny Richmond

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] To remove plastic mid-bezel, place plastic opening tool under the bezel at either the bottom left or bottom right corner.
[* black] Once plastic opening tool is under the bezel, carefully pry the bezel off in a circular pattern around the phone.
[* icon_caution]
The buttons should already be loose enough for removal. If notSo make sure you do not lose any buttons falling out.
[* black] To remove any buttons that did not fall out or come off with the removal of the mid-bezel
, place your fingernail behindunder the button and pop it off.
[* black] To remove plastic mid-bezel, place plastic opening tool under the bezel at either the bottom left or bottom right corner.
[* black] Once plastic opening tool is under the bezel, carefully pry the bezel off in a circular pattern around the phone.
[* icon_caution]
The buttons should already be loose enough for removal. If notSo make sure you do not lose any buttons falling out.
[* black] To remove any buttons that did not fall out or come off with the removal of the mid-bezel
, place your fingernail behindunder the button and pop it off.
[* black] To remove the USB or HDMI cover, grab the cover and pull upwards until it pops out.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido

Imagen 3

Ninguna imagen anterior

Añadido