Cambios al paso #9
Editado por Elizabeth Kamine —
Edicion aprobada por Elizabeth Kamine
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* red] Desolder the wires to fully disconnect the motherboard from the camera. | |
| + | [* icon_caution] Be careful! The soldering iron is hot. Do not burn yourself or the device. It should not be applied to the device too long to avoid damaging any of the device components. |
| [* icon_note] For a comprehensive guide on desoldering, visit [guide|750|iFixit's Soldering and Desoldering Guide]. |