Cambios al paso #4
Editado por Elizabeth Kamine —
Edicion aprobada por Elizabeth Kamine
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* icon_reminder] This step involves a lot of screws! To ensure you can reassemble your device properly at the end, keep track of the screws and their corresponding locations. |
|---|---|
| [* icon_note] Use a Phillips #000 Precision Screwdriver for all of the following steps. | |
| [* red] Remove the seven 4.0 mm screws that connect the metal plate to the motherboard. | |
| [* orange] Remove the three 4.0 mm screws that connect the metal hinges to the camera body. |