Cambios al paso #1
Editado por Elizabeth Kamine —
Edicion aprobada por Elizabeth Kamine
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* icon_reminder] This step involves a lot of screws! To ensure you can reassemble your device properly, keep track of the screws and their corresponding locations. |
|---|---|
| [* icon_note] Use a Phillips #000 Precision Screwdriver for all of the following steps. | |
| [* red] Remove both 4.5 mm screws holding the bottom into place. | |
| [* orange] Remove both 4.5 mm screws holding the side into place. | |
| [* yellow] Remove the 4.5 mm screw underneath the A/V flap. | |
| [* green] Remove the 4.0 mm screw on the left-side wrist strap loop. |