Cambios al paso #1
Editado por Michael Golahi —
Edicion aprobada por Michael Golahi
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* red] Using a Phillips #000 Precision Screwdriver, remove both 4.5 mm screws holding the bottom into place. | |
| + | [* icon_note] Use a Phillips #000 Precision Screwdriver for all the following steps. |
| [* orange] Remove both 4.5 mm screws holding the side into place. | |
| [* yellow] Remove the 4.5 mm screw underneath the A/V flap. | |
| [* green] Remove the 4.0 mm screw on the left-side wrist strap loop. |