Saltar al contenido principal

Cambios a Paso #4

Editado por Brett Hartt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Set the motherboard on a support so that the CPU and GPU are completely supported and level.
[* icon_note] The support should be something that can resist temperatures upwards of 300 degrees Celsius. Suggestions: scrap lumber, old books, cardboard box.
[* icon_note] In the next few steps, you will be reflowing the solder under the chips marked in red.
[* icon_caution] Once you begin reflowing the chips, do not touch or move the motherboard until it is completely cool. Doing so can render the motherboard irreparably damaged.