Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #42

Editado por Sam Goldheart

Edicion aprobada por Sam Goldheart

Antes
Después
Sin cambios

Líneas de Paso

[* black] Reinsert the opening pick under the Lightning connector ribbon cable from the case-side edge.
[* black] Slide the pick along the Lightning connector ribbon cable and under the logic board.
[* icon_caution] Move slowly and carefully. If the opening pick does not slide easily, apply more heat and try again. If you use excessive force, you will likely slip and sever the Lightning connector cable.
[* black] Leave the pick under the Lightning connector cable to keep the adhesive separated.