Cambios al paso #20
Editado por Andrew Optimus Goldheart —
Edicion aprobada por Andrew Optimus Goldheart
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] Hecka heat! |
|---|---|
| - | [* black] Hecka picks! |
| - | [* black] Hecka adhesive, eww! |
| + | [* black] We're getting [guide|30592|pretty good|stepid=71616|new_window=true] at [guide|18604|prying up glass|stepid=53111|new_window=true], so we've got some idea of where to start. |
| + | [* black] Step 1: Load up on heat. Use plenty of [product|IF145-198|iOpeners|new_window=true]. (Or one iOpener plenty of times). |
| + | [* black] Step 2: Pry gently in many places. [product|IF145-123|Opening Picks|new_window=true] are the ideal tool. |
| + | [* black] Step 3: ??? |
| + | [* black] Step 4: The adhesive is actually entirely underneath the LCD panel and not at all around the edges you just heated. [http://instagram.com/p/y7xALBO_A3/|Apply plenty of heat to the back|new_window=true] and pry slowly. |