Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #7

Editado por pollytintop

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] lift board up slightly to reveal 2 flexesribbon flex and 1 wire connector still attached beneath board-remove flex before lifting board off completely.
[* red] remove bottom flex first
[* black] use fingernails to gently pull out wire connector from lens

[* black] slide tabs on connectors from lens/shutter and lens screen horizontally away from board and then slide flex cables free
[* yellow] remove bottom most tab/flex first
[* icon_caution] lift board up slightly to reveal 2 flexesribbon flex and 1 wire connector still attached beneath board-remove flex before lifting board off completely.
[* red] remove bottom flex first
[* black] use fingernails to gently pull out wire connector from lens

[* black] slide tabs on connectors from lens/shutter and lens screen horizontally away from board and then slide flex cables free
[* yellow] remove bottom most tab/flex first

Imagen 1

Ninguna imagen anterior

Añadido