Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Cambios al paso #6

Editado por pollytintop

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* blackviolet] use fingernails or small flathead screw driver to push black tabs on view finder cable connector away from board connector
[* blackviolet] use fingernails or small flathead screw driver to push black tabs on view finder cable connector away from board connector
[* black] slide screwdriver beneath length of flex and gently lift upwards to remove flex from connector
[* blackyellow] lift flap on lens flex and gently slide flex out
[* redorange] use finger nails to gently prise small white connector in top leftfrom LCD (bottom right of boardboard) free- do not pull by wires
[* blackyellow] lift flap on lens flex and gently slide flex out
[* redorange] use finger nails to gently prise small white connector in top leftfrom LCD (bottom right of boardboard) free- do not pull by wires

Imagen 1

Ninguna imagen anterior

Añadido