Saltar al contenido principal

Cambios al paso #10

Editado por Walter Galan

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* icon_note] In order to remove the upper LCD and the cameras from the front bezel, it is helpful to coil the ribbon cables together.
[* black] Carefully coil the two ribbon cables together, so that the connectors are on the inside of the spool.
-[* icon_note] Wrap the ribbon cables tightly, but not too tight, as bending the connectors will render them inoperable.
+[* icon_reminder] Wrap the ribbon cables tightly, but not too tight, as bending the connectors will render them inoperable.