Saltar al contenido principal

Cambios al paso #8

Editado por Walter Galan

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Lift the left side of the front bezel away from the upper case.
-[* icon_note] Do not lift too far, or else the hinge pin will break. Only lift enough to clear the LED compartment, ~1".
+[* icon_note] Do not lift too far, or else the hinge pin will break. Only lift enough to clear the LED compartment, about 1".
[* black] Pull the front bezel to the left, separating the front bezel from the upper case.
[* icon_caution] Do not attempt to fully separate the two halves yet. There are still ribbon cables running through the upper case.