Saltar al contenido principal

Cambios al paso #8

Editado por Brett Hartt

Aprobación pendiente

Sin cambios

Líneas de Paso

-[* black] Insert wisdom here.
+[* black] Lift the left side of the front bezel away from the upper case.
+[* icon_note] Do not lift too far, or else the hinge pin will break. Only lift enough to clear the LED compartment, ~1".
+[* black] Pull the front bezel to the left, separating the front bezel from the upper case.
+[* icon_caution] Do not attempt to fully separate the two halves yet. There are still ribbon cables running through the upper case.