Saltar al contenido principal

Repara tus cosas

Derecho a reparar


Cambios a este Paso

Editado por hilerm

Aprobación pendiente

Sin cambios

Líneas de Paso

[* black] Carefully remove the metal clip from atop the rear-facing camera and set it aside. You'll be placing it back during reassembly.
[* black] After removing the clip, carefully pry the rear-facing camera away from the case.
[* black] Be careful not to pry on the metal top. Doing so may damage the camera.
[* black] Pry from the upper side and far enough down to pry against the plastic side. You only want to loosen the camera from the case.