Saltar al contenido principal

Repara tus cosas

Derecho a reparar


Cambios al paso #15

Editado por Andrew Bookholt

Aprobación pendiente

Sin cambios

Líneas de Paso

[* black] After removing a loop of copper tape around the digitizer connector, the display assembly can finally be separated from the logic board.
[* black] A copper shield fastened to the back of the battery can also be removed at this point.
[* black] Presumably, the rear case is thin enough to warrant a copper shield for either heat dispersion or EMI protection, or both.

Imagen 1

Ninguna imagen anterior


Imagen 2

Ninguna imagen anterior