Saltar al contenido principal

Cambios al paso #2

Editado por Dominik Schnabelrauch

Edicion aprobada por Dominik Schnabelrauch

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Start by lifting the back panel using the gap located on the bottom-left side of the phone.
-[* black] Insert the plastic opening tool into the gap and move it along the edge of the phone until the rear case pops off.
+[* black] Lift the back cover to release the rest of the plastic clips and remove it.
+ [* icon_note] In case you can't lift the back cover completely, slide your fingernail or you prying tool around the midframe to release the remaining clips.
+[* black] Remove the back cover.
+[* icon_reminder] To reinstall the back cover press it firmly into place until you hear a snap from the plastic clips to form a seamless connection with the rear side of the phone.