Saltar al contenido principal

Changes to Step #4

Editado por James Stoy

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use theI used a spudger to un clip the silver front of the phone by inserting it at the point shown in the image and then running it down the side of the phone downwards (towards the bottom).
[* black] RepeatRinse and repeat on the other side.
[* black] Now runThen I ran the the spudger carefully round the top edges of the phonephone, there was a clip at the very top.
[* black] PullPulled the casing apart gently.
[* black] YouI now have the front and back part of the Nokia E72.
[* black] Use theI used a spudger to un clip the silver front of the phone by inserting it at the point shown in the image and then running it down the side of the phone downwards (towards the bottom).
[* black] RepeatRinse and repeat on the other side.
[* black] Now runThen I ran the the spudger carefully round the top edges of the phonephone, there was a clip at the very top.
[* black] PullPulled the casing apart gently.
[* black] YouI now have the front and back part of the Nokia E72.