Saltar al contenido principal

Cambios a Paso #14

Editado por Miroslav Djuric

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Sadly, the Streak's LCD is permanently adhered to the front panel glass (like the [guide|3130|iPhone 4|stepid=15351]) and cannot be separatedglass. However, that LCD/glass subassembly is held in the framefront panel with some very strong 3M adhesive, butand could be removed with enough careful prying.
[* black] Sadly, the Streak's LCD is permanently adhered to the front panel glass (like the [guide|3130|iPhone 4|stepid=15351]) and cannot be separatedglass. However, that LCD/glass subassembly is held in the framefront panel with some very strong 3M adhesive, butand could be removed with enough careful prying.
[* icon_note] The LCD is bonded to the front panel glass to increase the strength of the device and sensitivity of the capacitive touch panel.
[* black] The inner face of the front panel assembly isn't all that exciting. The ear speaker and vibrator motor can be seen near its top edge.
[* black] The touchscreen ribbon cable houses:
[* red] Pixcir's [link|http://www.digitimes.com/news/a20100111PD216.html|controversial] Tango S32 Touchscreen controller
[* orange] Atmel's ATmega168P 8-bit AVR microcontroller