Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #10

Editado por kkazkaz

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use a firm plastic edge to scrape the thermal material off the processor.
[* icon_reminder] When replacing the logic board, make sure all cables are routed around and above - not under - it, and to connect the two cables that do go beneath before pushing the board into place. Remember that there are the 13 cables from step 15 as well as the modem cable from step 14.
[* icon_reminder] When replacing the logic board, make sure all cables are routed around and above - not under - it, and to connect the two cables that do go beneath before pushing the board into place. Remember that there are the 13 cables from step 15 as well as the modem cable from step 14.
[* icon_reminder] Place the logic board back in the computer, trying not to move it around once the processor has come into contact with the newly-applied thermal paste.