Cambios al paso #10
Editado por iRobot —
- Antes
- Después
- Sin cambios
Líneas de Paso
[* black] Use a firm plastic edge to scrape the thermal material off the processor. |
[* icon_reminder] When replacing the logic board, make sure all cables are routed around and above - not under - it, and to connect the two cables that do go beneath before pushing the board into place. |
[* icon_reminder] Place the logic board back in the computer, trying not to move it around once the processor has come into contact with the newly-applied thermal paste. |
Imagen 1
Ninguna imagen anterior
Añadido