Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Zachary Traynor

Edicion aprobada por Zachary Traynor

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] The capacitor can store electricity even when the camera is off! Do not touch it until you have safely discharged it.
[* red] Connect the two capacitor wires briefly with a pair of metal tweezers to discharge itthe capacitor. You may see a small spark.
[* red] Connect the two capacitor wires briefly with a pair of metal tweezers to discharge itthe capacitor. You may see a small spark.
[* black] Remove eight screws using a Phillips #00 screwdriver.
[* orange] Two (4.31 mm) screws are in the front of the camera.
[* yellow] Two (3.30 mm) screws are located in the bottom of the camera.
[* icon_note] This causes the tripod mount on the bottom to become loose.
[* green] Four (3 x 3.33 mm and 1 x 4.34 mm) screws are in the back of the camera.