Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Zachary Traynor

Edicion aprobada por Zachary Traynor

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] The capacitor can store electricity even when the camera is off! Do not touch it until you have safely discharged it.
[* red] Connect the two capacitor wires briefly with a pair of metal tweezers to discharge it. You may see a small spark.
[* black] Remove 8 screwseight screws using a Phillips #00 screwdriver.
[* orange] 2Two (4.31 mm) screws are in the frontfront of the camera.
[* yellow] 2Two (3.30 mm) screws are located in the bottombottom of the camera.
[* black] Remove 8 screwseight screws using a Phillips #00 screwdriver.
[* orange] 2Two (4.31 mm) screws are in the frontfront of the camera.
[* yellow] 2Two (3.30 mm) screws are located in the bottombottom of the camera.
[* icon_note] This causes the tripod mount on the bottom to become loose.
[* green] 4Four (3 x 3.33 mm and 1 x 4.34 mm) screws are in the backback of the camera.
[* green] 4Four (3 x 3.33 mm and 1 x 4.34 mm) screws are in the backback of the camera.