Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Zachary Traynor

Edicion aprobada por Zachary Traynor

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] The capacitor can store electricity even when the camera is off! Do not touch it until you have safely discharged it.
[* red] Connect the two capacitor wires briefly with a pair of metal tweezers to discharge it. You may see a small spark.
[* black] Remove 8 screws.
[* orange] 2 (4.31 mm) screws are in the front. (2x4.31mm)
[* yellow] 2 (3.30 mm) screws are located in the bottom (2x3.30mm)bottom.
[* icon_note] This causes the tripod mount on the bottom to become loosebecome loose.
[* green] 4 (3 x 3.33 mm and 1 x 4.34 mm) screws are in the back. (3x3.33mm, and 1x 4.34mm)
[* orange] 2 (4.31 mm) screws are in the front. (2x4.31mm)
[* yellow] 2 (3.30 mm) screws are located in the bottom (2x3.30mm)bottom.
[* icon_note] This causes the tripod mount on the bottom to become loosebecome loose.
[* green] 4 (3 x 3.33 mm and 1 x 4.34 mm) screws are in the back. (3x3.33mm, and 1x 4.34mm)