Saltar al contenido principal

Cambios al paso #3

Editado por Chris L

Edicion aprobada por Chris L

Antes
Después
Sin cambios

Líneas de Paso

-[* red] There are two notches at the top of the calculator.
+[* red] Find the two notches at the top of the calculator.
[* black] Insert a flat-head screwdriver into one of the notches and carefully pry open the top end of the case.
-[* red] The case is still attached at the sides.
+[* red] Locate where the case is still attached at the sides.
[* black] Insert the flat-head screwdriver into one side where the gap has widened.
-[* black] Now gently pry apart the sides of the case (prying only one side will release the other side as well).
+[* black] Now gently pry apart the sides of the case.
+[* icon_note] Prying only one side will release the other side as well.