Saltar al contenido principal

Cambios a este Paso

Editado por Richard Maunder

Edicion aprobada por Jeff Suovanen

Sin cambios

Líneas de Paso

[title] Reassembly
[* black] Reassembly is the reverse of the above steps
[* black] After fitting the initial two screen bracket Torx screws, close the lid and lay laptop upside down
[* black] Check the alignment of the screen to body. Loosen two Torx screws again to set correctly.
[* black] Then insert and tighten all the display bracket Torx screws

Imagen 1

Ninguna imagen anterior