Saltar al contenido principal

Cambios al paso #16

Editado por Sam Goldheart

Edicion aprobada por Sam Goldheart

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the following eight screws securing the logic board and DC-In board to the upper case:
[* red] Six 3.2 mm Phillips screws T6
[* icon_note] These may be T6 Torx
screws on the Early 2011 model.
[* red] Six 3.2 mm Phillips screws T6
[* icon_note] These may be T6 Torx
screws on the Early 2011 model.
[* orange] Two 7.6 mm Phillips screws