Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #11

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use your fingernail to flip up the retaining flap on the keyboard ribbon cable socket.
[* icon_caution] Be sure you are prying up on the retaining flap, '''not''' the socket itself.
[* black] Pull the keyboard ribbon cable out of its socket.
[* black] '''Tip for re-seating the keyboard cable:'''icon_reminder] For reassembly, it can be helpful to put a small piece of sticky tape on, fold over aton the top end, re-seatkeyboard ribbon cable (being careful not to stick any to the connector (carefully!)contacts), to create a small handle. Align the cable with a spudgerthe socket and (gently!)gently pull with the tape 'over' the connector on the logic board until you feel it nudges in fully. Notice the emphasis on "carefully" and "gently"... :)to fully seat it.
[* black] '''Tip for re-seating the keyboard cable:'''icon_reminder] For reassembly, it can be helpful to put a small piece of sticky tape on, fold over aton the top end, re-seatkeyboard ribbon cable (being careful not to stick any to the connector (carefully!)contacts), to create a small handle. Align the cable with a spudgerthe socket and (gently!)gently pull with the tape 'over' the connector on the logic board until you feel it nudges in fully. Notice the emphasis on "carefully" and "gently"... :)to fully seat it.