Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #11

Editado por LeonSteyns

Edicion aprobada por Andrew Optimus Goldheart

Sin cambios

Líneas de Paso

[* black] Use your fingernail to flip up the retaining flap on the keyboard ribbon cable socket.
[* icon_caution] Be sure you are prying up on the retaining flap, '''not''' the socket itself.
[* black] Pull the keyboard ribbon cable out of its socket.
[* black] '''Tip for re-seating the keyboard cable:''' put a piece of sticky tape on, fold over at the top end, re-seat the connector (carefully!) with a spudger and (gently!) pull the tape 'over' the connector on the logic board until you feel it nudges in fully. Notice the emphasis on "carefully" and "gently"... :)