Saltar al contenido principal

Changes to Step #4

Editado por tff

Edicion aprobada por tff

Borrada
Añadida
Sin cambios

Step Lines

[title] Release spring tension in the stand if necessary
[* black] The screws circled in red maintain the pressure on the coil springs in the stand. If you can maneuver the iMac relative to the stand such that the gap highlighted by the green arrow (pic2) closes all the way, then pressure from the coil springs will be removed from the external part of the stand.
[* black] I couldn't do that, so I removed these screws to release the pressure between the internal and external part of the stand.
[* black] NOTE: once the screw is released, the coil spring will launch'''launch''' the plastic piece and screw that holdshold the spring! (It took me quite a while to find the first one.) I highly recommend covering the screw with something (pic3) as you remove the screw.
[* black] New line.
[* black] NOTE: once the screw is released, the coil spring will launch'''launch''' the plastic piece and screw that holdshold the spring! (It took me quite a while to find the first one.) I highly recommend covering the screw with something (pic3) as you remove the screw.
[* black] New line.