Cambios a Paso #1

Editado por jmueller

Edicion aprobada por Andrew Optimus Goldberg

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_caution] Whenever working near the logic board, it is always wise to first disconnect the battery to avoid short circuits.
[* black] If present, grab the plastic tab attached to the battery connector and pull it toward the front edge of the device. For Late-2011 models the battery connector will not have a tab and is simply a plug that inserts straight down into the motherboard--to remove pry the plug straight up.
[* black] If present, grab the plastic tab attached to the battery connector and pull it toward the front edge of the device. For Late-2011 models the battery connector will not have a tab and is simply a plug that inserts straight down into the motherboard--to remove pry the plug straight up.
[* icon_note] If the plastic tab is missing, use a spudger to pry the connector up from its socket.
[* icon_reminder] Pull the tab parallel to the face of the logic board.