Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por Walter Galan

Edicion aprobada por Walter Galan

Antes
Después
Sin cambios

Líneas de Paso

[* icon_caution] Whenever working near the logic board, it is always wise to first disconnect the battery to avoid short circuits.
[* black] GrabIf present, grab the plastic tab attached to the battery connector and pull it toward the front edge of the device. Some models does not have
[* icon_note] If the
plastic tab, in that casetab is missing, use a spudger to liftpry the connector upup from its socket.
[* icon_noteicon_reminder] Pull the tab parallel to the face of the logic board.
[* black] GrabIf present, grab the plastic tab attached to the battery connector and pull it toward the front edge of the device. Some models does not have
[* icon_note] If the
plastic tab, in that casetab is missing, use a spudger to liftpry the connector upup from its socket.
[* icon_noteicon_reminder] Pull the tab parallel to the face of the logic board.