Saltar al contenido principal

Cambios al paso #1

Editado por Darryl

Edicion rechazada por David Hodson

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Remove the four T6 Torx screws around the outer edge of the hard drive.
+[* red] Remove the four T6 Torx screws around the outer edge of the old hard drive.
+[* black] Add the four T6 Torx screws in the same position around the edge of your new hard drive.
[* icon_note] If desired, peel off the plastic pull tab and transfer it to your new hard drive.
[* icon_reminder] If you are installing a new hard drive, we have an [guide|751|OS X install guide] to get you up and running.