Cambios al paso #4
Editado por Bryce Nesbitt —
Edicion aprobada por Bryce Nesbitt
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* black] This is your goal: disassemble the switch parts, wash them thoroughly in clean water, and dry thoroughly. |
|---|---|
| + | [* black] Optionally, use a silicon grease on the plastic and rubber parts, and a polyphenyl ether (PPE) lubricant on the gold contacts. If you don't have a PPE lubricant a very very light coating of a light lubricating oil also works. This step is optional. |
Imagen 1
Ninguna imagen anterior
Añadido