Saltar al contenido principal

Changes to Step #2

Editado por Dominick Giguere

Edicion aprobada por Dominick Giguere

Borrada
Añadida
Sin cambios

Step Lines

[title] Detach Speaker from Wires
[title] Detach Speaker from Wires
[* black] The red wire is the + and the tan wire is the -. These wires are connected with solder.
[* black] Apply the hot soldering iron tip to the solder on the speaker connection solder.
[* black] Pull the speaker away from the wires.
[* black] Apply the hot soldering iron tip to the solder on the speaker connection solder.
[* black] Pull the speaker away from the wires.