Saltar al contenido principal

Cambios al paso #3

Editado por Daniel Robles

Edicion aprobada por Daniel Robles

Antes
Después
Sin cambios

Líneas de Paso

+[* black] Remove the black sticker on the bottom left side (As shown in the picture).
+[* black] Remove the screw that was under the black sticker using the Torx Screwdriver 5mm.
+[* black] Using the plastic opening tool separate the plastic cover from the screen. You will notice that there are pieces attached to both sides (So be careful). On the top left corner you will see the screen’s flex attached to the mother bothered, be careful when separating them.