Saltar al contenido principal

Cambios al paso #3

Editado por Jesse L

Edicion aprobada por Jesse L

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] Make note of where each driving gear cover is placed. They only go in one way.
[* black] Remove the eight 8.0mm Phillips #00 screws, two sets of four Phillips-Head screws(red:) one set on one side and the other set on the otherscrews for each wheel.
[* black] Remove the eight 8.0mm Phillips #00 screws, two sets of four Phillips-Head screws(red:) one set on one side and the other set on the otherscrews for each wheel.